Need Help Identifying Carb Springs

[clawhamm3r]

Found these two tiny springs in the bottom of my ultrasonic cleaner after cleaning my carbs and petcock. I know they didn't come from the petcock, and all of the small carb stuff was in the smaller mesh basket on the side. So I'm guessing these vibrated out of the carb bodies which were in the main basket. Anyone know where they go? Pilot jet and idle mix screw for size reference.

Maybe could be #60 in the Partzilla diagram but I think I see the ball in that location is still there and no way for something to come out behind it.

 

[CaptChrome]

They look like the enricher shaft detent springs #60 to me.

 

[clawhamm3r]

They look like the enricher shaft detent springs #60 to me.

Yeah, that's the conclusion we arrived to on my FB post! Mine didn't have the balls though, or if they did they're on the garage floor. But my rod was bent so I actually bought a new one for this rebuild. It, and the old one, only have detents on the front/first carb so I guess I only really need 1 ball?

 

[CaptChrome]

so I guess I only really need 1 ball?

The carbs came from the factory with balls and springs in each carb, but you really only need them for the left one that has the detente in the enricher operating rod.

 

[XSRIDER77]

What size are the balls?

 

[clawhamm3r]

What size are the balls?

Pretty tiny, I got the replacements on the bench. Still need to reassemble everything.