Clutch material has left the chat

tstidham

XS400 Addict
Messages
385
Reaction score
185
Points
43
Location
Philadelphia, PA
Did some spring prep this year on the 78 with some new tires and tubes, a new chain and a new clutch (finally). And yes, I think the original clutch gave all it had to give! The steels were flat but showed some pitting so I used a complete kit with frictions and steels. The springs seemed perfect. Surprisingly easy job to do.

I picked up a good used Avon front tire, a new Shinko back tire and new tubes. I used the Ride-On balancer fluid after mounting and the bike rides super smooth! Coupled with the new chain and it rides like a brand-new bike! My old chain, which I think was original, was majorly stretched. The old adjustment was between the 4 and 5 tick marks on the rear swing arm, the new chain hit's proper adjustment at 2 ticks.:thumbsup:

Now to get it through inspection (I've been riding dirty for the past year)
20230316_154611.jpg
20230311_151516.jpg
20230311_162810.jpg
.:(
 
Good score on the Avon tire! I'd also say that someone got their moneys worth out of that clutch - I am surprised you were able to ride with it.
The Avon was a good score, $25 and it looks barely broken in. For the clutch, I pretty much had to adjust the slack every time I rode! o_O Driving easy, you wouldn't have known, but try to give 1/2 beans or more and she'd start to slip. The bike only has 14k miles on it so it is likely the original.
 
Back
Top