tstidham

If it's still points, I'm pretty sure the factory caps are 0 ohm caps and 0 ohm plugs. Although they stopped making the non-resistor plugs.

Looks like a DOHC engine so check the diagrams for 1982-83. I also see an aftermarket rectifier-regulator bolted to the frame so tracing...

Very cool story to go with a cool bike!

I don't know what you have available in France, but there are some online stores that may ship overseas. The rod bolts and nuts are...

You got it!

In addition, depending on how they were adjusted, it possible they were already far to lean and the idle speed screw was used to obtain...

Correct. Most idle mixture screws adjust air quantity, but our mikuni carbs actually adjust fuel quantity. So in is lean and out is...

The front wheel should turn whether the engine is running or not. I'd start with removing the front caliper to see if it spins.

What year and model? There are some distinct differences between 70s and 80s models and whether they are single or dual overhead cam...

Ah, someone removed your points and installed the mikes xs electronic ignition kit. I also bought the same kit, but haven't installed it...

I was under the impression it was an 1980 or newer. I see now you have a 1978, so it should have points. Pull the points cover off the...